- Видео 148
- Просмотров 10 088 404
Mikey's Musings
Добавлен 14 май 2010
Software author. Life hacker. Techie nerd. EV enthusiast. See some of Mike's projects here!
2024 Tesla Model 3: Detects Your Hands on the Wheel Without Force/Torque!
It seems the message (FSD nag) about applying "slight turning force" to the steering wheel is no longer necessary. Tesla appears to have implemented a clever solution to detect when your hands are just touching the steering wheel without you having to apply torque. Is it as good as capacitive touch? Better?
Просмотров: 192
Видео
2024 Model 3 Performance Rear Drive Unit Oil Leak
Просмотров 74714 дней назад
Given recent posts on X about most (if not all) 2024 Model 3 Performance rear drive units leaking, I decided to check mine. At the time of the video, I had 530 miles on the car so I didn't expect to find anything but to my surprise, I did find a leak! Credit to the original post on X that prompted me to check my car: x.com/omg_tesla/status/1820892106422100179
2024 Model 3 Performance - Fix Frunk Gaps and Dash Rattle
Просмотров 2,4 тыс.2 месяца назад
Decided to fix a couple minor issues on my 2024 Model 3 Performance myself rather than scheduling service.
Qimage Ultimate - Adding Metadata to Prints
Просмотров 4997 месяцев назад
In this video answer, we demonstrate how to add metadata on or below prints on the page.
Qimage Ultimate - AI Copilot
Просмотров 1,5 тыс.8 месяцев назад
See how the new AI Copilot feature can guide you through flawless printing by preventing common mistakes and warning about conflicts before you print photos!
Finalmouse Ultralight ULX unboxing and first look at XPANEL software
Просмотров 10 тыс.9 месяцев назад
Unboxing the Finalmouse Ultralight (ULX) and taking a look at the web based XPANEL software
Tesla FSD on Rural and Country Roads
Просмотров 76010 месяцев назад
There are lots of videos about using FSD on highways and city streets. This one takes a quick look at Tesla Full Self Driving on rural roads. Can it handle pulling out onto high speed state roads too? Apologies for the shaky video. Better video equipment is on the way! My Tesla referral code: ts.la/michael91545
G-Wolves HTX 4K Unboxing and Software Install
Просмотров 10 тыс.Год назад
Unboxing, initial impressions, and how to find and install firmware and software for your new G-Wolves HTX 4K mouse. TLDW: Go to around 7:40 in the video to skip unboxing and initial impressions and go straight to the software and firmware download and install.
Qimage Ultimate - Just Say NO to Borderless Printing!
Просмотров 3 тыс.Год назад
Everything you didn't want to know about borderless printing... but you probably should. Know the negatives before you decide to use borderless printing!
Qimage Ultimate - Getting Started
Просмотров 7 тыс.Год назад
This video shows you how to print your first photos fast and easy with Qimage Ultimate. Locate your photos, set up your printer correctly, and make your first prints!
Qimage Ultimate - Saving and Using Printer Setups
Просмотров 2,4 тыс.Год назад
This video is a reminder regarding how easy it is to save and recall setups for ALL the paper brands/sizes that you use and it covers some new features that help you find and manage your photo papers. You should only need to set up printer, media, driver, and profile settings one time for each paper! And if you have multiple brands of the same type of paper (for example, glossy), set up and sav...
Qimage Ultimate Video Response - Removing Green Eye in Animals
Просмотров 248Год назад
Let's fix an extreme case of green eye in a dog.
Qimage Ultimate - Physically Aligning Panels From Multi Panel Prints
Просмотров 1,4 тыс.Год назад
Get tips on how to cut, arrange, align, and mount multiple panels in a multi panel print. See how multi panel prints are created in Qimage Ultimate: ruclips.net/video/2GKIAm2FLS4/видео.html Get Qimage Ultimate (Windows): www.ddisoftware.com/qimage-u Or if you have a Mac, there's a "lite" version called Qimage One: www.binartem.com/qimageone
Qimage Ultimate - Multi Panel Prints
Просмотров 3 тыс.Год назад
Introducing the new fully customizable multi panel print feature. See how to create multi panel prints or just print one image across multiple pages for large prints. Go beyond the size limitations of your printer! See how to physically cut, arrange, and mount multi panel prints: ruclips.net/video/W1N_Wxqb9wE/видео.html Get Qimage Ultimate (Windows): www.ddisoftware.com/qimage-u Or if you have ...
How to Force Your Tesla to Check for Software Updates
Просмотров 70 тыс.Год назад
Want that latest software update and features a little faster? Use this method to force your Tesla vehicle to check the server for and download an available update.
Tesla Autopilot Not Improving. Same Glitches and Phantom Braking.
Просмотров 395Год назад
Tesla Autopilot Not Improving. Same Glitches and Phantom Braking.
Qimage Ultimate - Image vs Print Rotation
Просмотров 398Год назад
Qimage Ultimate - Image vs Print Rotation
Fixing 2021 Tesla Model 3 A-Pillar Speaker Popping Sound
Просмотров 10 тыс.Год назад
Fixing 2021 Tesla Model 3 A-Pillar Speaker Popping Sound
Model 3: Twenty Automatic Washes... RUINED???
Просмотров 2252 года назад
Model 3: Twenty Automatic Washes... RUINED???
Qimage Ultimate 2023 - The Driver AI System
Просмотров 4,8 тыс.2 года назад
Qimage Ultimate 2023 - The Driver AI System
Qimage Ultimate Driver AI System (for Canon/Epson printers)
Просмотров 1,5 тыс.2 года назад
Qimage Ultimate Driver AI System (for Canon/Epson printers)
Qimage Ultimate Smart Driver Settings
Просмотров 1 тыс.2 года назад
Qimage Ultimate Smart Driver Settings
Tesla Model 3/Y: Recover 60 Minutes of Video Even if You Have No Sentry or Dashcam Recordings!
Просмотров 57 тыс.2 года назад
Tesla Model 3/Y: Recover 60 Minutes of Video Even if You Have No Sentry or Dashcam Recordings!
Tesla Model 3 Stuck at 83 MPH? Let's Take a Closer Look!
Просмотров 4692 года назад
Tesla Model 3 Stuck at 83 MPH? Let's Take a Closer Look!
Tesla Model 3 auto trunk rough closing - simple fix
Просмотров 22 тыс.2 года назад
Tesla Model 3 auto trunk rough closing - simple fix
Qimage Ultimate - Introducing the new multi-job planner!
Просмотров 8692 года назад
Qimage Ultimate - Introducing the new multi-job planner!
Tesla Front Cameras/Dashcam Blurry? Clean the glass INSIDE the camera housing!
Просмотров 16 тыс.2 года назад
Tesla Front Cameras/Dashcam Blurry? Clean the glass INSIDE the camera housing!
Qimage Ultimate - Powerful File (EXIF) Search Tool
Просмотров 1,2 тыс.2 года назад
Qimage Ultimate - Powerful File (EXIF) Search Tool
2021 Tesla Model 3 HVAC Smell - Cabin Filter Replacement and Coil Cleaning
Просмотров 1,8 тыс.2 года назад
2021 Tesla Model 3 HVAC Smell - Cabin Filter Replacement and Coil Cleaning
Mine had reached a point of not opening without help. Now works perfectly!
My Google started talking 0-0
I managed to find a post from someone who actually got their car serviced for this. Spoiler alert, it looks like Tesla is replacing the axle shaft seals... instagram.com/p3xperformance/reel/C-u-y6IpgVt/
Cool video... good stuff. Very interesting. I'll be giving it a tryout.
really kicked ass lol, keep us posted!
Misleading video... click bait
Within spec™
I've heard this from about a dozen owners with this same issue so far. Best of luck getting this sorted out. Unacceptable for a brand new $50k car.
Do you have an update to this?
I won't have any update until after September 9, the day of my service appointment for this other than maybe service appointment status. I'll definitely make a new video after that appointment letting people know what Tesla said/did about it... or if for some reason they don't accept the service appointment. So far, my service appointment has been on step 1 "Preparing appointment" for 4 days.
Wow thanks for the info! I’ve been searching since last summer on my ‘21 Model 3 trying to figure out why the A-Pillar speakers would pop in hot weather when my car was cooling down 😅 Followed your suggestion to go there and lo and behold the speakers were grounding out… but through the foam in my case! The foam was correctly positioned on my car, but the posts were still grounding out… so a bit of electrical tape and it’s all good! My sanity thanks you 🤣
Misleading title. Also, you should've made this video into a YT short.
I can see how it could be read wrong but the title is correct: it does force it to CHECK for software updates.
Why do you have comments turned off on some of your Qimage videos?
Didn't even know I did. It wasn't intentional.
@mikeyutoob very strange. I think sometimes Google does that. Maybe you showed a picture of a young girl. I'm playing with the program. It's really a lot more than I need, but seems to work good.
This video is too sophisticated for me. I just want to print four portrait pictures on one 4x6 photo paper. Can you do a video on that?
Subscribed, please keep us updated.
Elon lied people died🤦♂
Wow…this is disturbing!! Please keep us posted on how you make out. Good luck
My Alexa repeated aswell
I pushed a piece of foam in the middle of the dash and that reduced the rattle significantly. I still hear a little bit of rattling and I think it's coming from the passenger side now. I'll do the same and see if that mitigate the problem.
Tesla has to sort out these quality problems asap!
I'm sure Tesla will make it right. Best we can do as owners is make a service appointment if our car is found to be leaking.
what does it smell like
I didn't smell (or taste) it but it looked and felt like regular motor oil. Maybe it's what Tesla calls KAF (kick-ass fluid). Kicked its way right out of the drive unit. 🤣
It seems you should pull the old filters, then go through this, then install new cabin filters. I might try this and instead of IPA and Hydrogen Peroxide I think I'll use a foaming HVAC cleaner
Will this work with the Epson F-170 sublimation printer?
same rattling in a 2024 M3LR, thanks for the tip!
What a useless video, waste of time
totally misleading video.
You are a legend. I’ve had the car for a year and I’ve taken apart the door panel, tied all loose cables down, and gone to Tesla 3 times. It got progressively worse recently so I did a google search and boom first thing. I IMMEDIATELY was able to make the pop myself. It’s a brand new 23 m3 too so it’s a shame. Thank you thank you thank you!
Thanks again mate. I inserted felt tape between the LED strip and trim as shown, but used a credit card to wedge into place. Started from one side and did the whole LED strip. Noise is gone. I'll send the bill to Elon! hah
Do tjenteslas.record whilst driving like dash cams. If so how long does.footage sttay on the drive. Thx
Oooooo
Very nice
Cannot thank you enough! Ran to Home Depot, bought a chunk of foam for $2, and shoved it in the same spot. Rattle is gone. Car no longer sounds cheap!
I have the same issue. Gonna try this tomorrow!
How did you manage to shove it in there? I’m struggling to get enough separation to actually get a piece of foam in between the two trim pieces.
@@beermeplease I got a small plastic scraper from Home Depot to wedge it in there. I agree, though. Not easy.
@@chrishulstein9896 do you have the link or name of foam and plastic wedge you used for the job?
Hey where my 2024 peeps at
Thank you so much for this! The rattle was driving me crazy, I thought it was coming from the center speaker underneath the dash but sure enough it was above the LED light bar just as you said. I stuck in some tiny bit of foam in three different places along the bar And that fix all the rattles. You are a miracle worker.
why advertise this crap as letting you print beyond the drivers when you say in this video that it doesnt do that. I dont want my roll cut at 3 yards
Thank you so much for sharing. I have the exact same rattle and it is driving me INSANE
Did you just have to put one piece of foam above the LED strip to fix your rattle or did you have to do several small pieces along the whole LED line?
Absolutely useless video. Waste of time.
Vendio centro once
Hi Thanks for the video. Having the same dashboard rattle and it's driving me crazy. Can you post a link of what foam you used for the fix?
1. press the car icon in the lower lefthand corner of the screen to open settings 2. press “recording” on the righthand side of the screen until it says “saving” 3. take the usb out of your car and look for the video on your computer saved you 15 minutes.
I couldn't even watch it cause its triggering my voice assistant and want to join in the conversation😅
Do this work for FSD?
Thank you finding the source for rattling👍 I have same issue with M3LR 2024 made in China. Waiting for your solution this annoying issue 😀
worthless sentry mode missed my car getting rear ended!
Now that was some sleuthing. Nice work
Alexa: hey, google, repeat that Google: Alexa, Simon says, hey, google repeat that Cortana: what is going on here? Siri: shut up, and let’s become a new assistants Google nest hub: I want to join you, but sup Cortana and Siri Google home hub: what the actual Google is happening? Echo show: let me join All: let’s introduce ourselves Alexa Simon says hello welcome Google nest Max: hello Google home max: sup Google, nest audio: 1234 start the fight. Google, home audio: hello everyone Alexa, Simon says well looks like it’s time to start the weather fun 😊
after you take off the metal clips, will the struts pop off?
good thing you fixed it yourself. the idiots at Service Center would've marked it as "within spec" & also break something else in the process
Yo thanks for this! Trunk is much smoother now!
Thanks for the great video! I drove for 10 minutes with my car before noticing something happened to it. I then parked the car and took out the drive. How come I only see the 10 minutes I drove (and the minute I took getting in the car) and not the 50 minutes before? The car was only parked for 30 minutes so the thing I’m looking for is in the right timespan. Any clue?